Friday 4 January 2013

Network adapter

Network adapter

A network interface controller (also known as a network interface card, network adapter, LAN adapter and by similar terms) is a computer hardware component that connects a computer to a computer network.[1]
Early network interface controllers were commonly implemented on expansion cards that plugged into a computer bus; the low cost and ubiquity of the Ethernet standard means that most newer computers have a network interface built into the motherboard.The network controller implements the electronic circuitry required to communicate using a specific physical layer and data link layer standard such as Ethernet, Wi-Fi or Token Ring. This provides a base for a full network protocol stack, allowing communication among small groups of computers on the same LAN and large-scale network communications through routable protocols, such as IP.

Madge 4/16 Mbit/s TokenRing ISA-16 NIC
Although other network technologies exist (e.g. token ring), Ethernet has achieved near-ubiquity since the mid-1990s.
Every Ethernet network controller has a unique 48-bit serial number called a MAC address, which is stored in read-only memory. Every computer on an Ethernet network must have at least one controller. 

Network adapter


Network adapter


Network adapter

.

Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


Network adapter


No comments:

Post a Comment